How To Activate a New PS4 Controller

How To Activate a New PS4 Controller

What is PS4 Controller?

The DualShock 4 features the following buttons: PS button, SHARE button, OPTIONS button, directional buttons, action buttons (triangle, circle, cross, square), shoulder buttons (R1/L1), triggers (R2/L2), analog stick click buttons (L3/R3), and a touch pad click button.

How To Activate a New PS4 Controller

  1. If your controller is turned off, press the PS button.
  2. When your controller has enough battery life, you can disconnect the USB cable and use your controller wirelessly.
  3. Please note, your controller can pair with only one console at a time.

Frequently Asked Questions

How do I pair a new PS4 controller?

While pressing and holding the (create) button, press and hold the PS button until the light bar blinks. 3. Enable Bluetooth® on your device, and then select your controller from the list of Bluetooth® devices. When pairing is complete, the light bar blinks, and then the player indicator lights up.

Why wont my new controller connect to PS4?

If your PS4 controller won’t connect, try a different USB cable, in case the original one has failed. You can also reset the PS4 controller by pressing the button on the back of the controller. If your controller still won’t connect to your PS4, you might need to get support from Sony.

How do I reset my new PS4 controller?

On the back of your controller, you will find a tiny hole – the reset button is inside this hole. Use a small, unfolded paper clip (or something similar) to press and hold the reset button for at least five seconds. Your controller should now have been reset.

Do you have to sync a new PS4 controller?

The first time you use a controller or when you want to use the controller on another PS4™ system, you’ll need to pair it with the system. Connect the controller to your system with a USB cable while the system is on. When you want to use two or more controllers, you must pair each controller separately.

How do I test my PS4 controller?

About This Article

  1. Right-click the Start logo.
  2. Click Control Panel to launch the app.
  3. Click View Devices and Printers.
  4. Right-click Wireless Controller.
  5. Click Game controller Settings.
  6. Click Properties.

What does yellow light mean on PS4 controller?

Depends on the context. A yellow, solid light when the system is in rest mode or turned off means that the controller is currently charging. A blinking yellow light indicates the controller was just plugged in to charge.

Why is PS4 controller flashing white?

A flashing white light on your PS4 controller usually indicates that the controller is trying to connect to the console. This can happen if the controller has been disconnected from the console or if you’re using a new controller that hasn’t been paired with the console.

What buttons do you press to reset a PS4 controller?

Unplug the controller, and flip it over. While it is upside down, locate the recessed reset button in the small hole near the controller’s L2 button and use your paper clip or pin to press and hold it for at least 6 seconds. Release the reset button and wait a few more seconds.

How come my PS4 controller won’t charge?

What Causes a PS4 Controller to Not Charge. When a PS4 controller fails to charge, there are a handful of potential causes to examine. There may be a problem with the charging port or cable, a problem with the PS4 that prevents it from providing power over USB, or a problem with the PS4 controller battery.

Do you need original cable to connect PS4 controller?

Dualshock 4 controllers can use any micro-USB cable to connect the controller to the console. IIRC, the controller usually comes with a cable when you buy a console or a new controller, but even if it does not, you can utilize any micro-USB cable you currently have.